Subaru Outback (BR): Transmission select lever
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Automatic transmission/Continuously variable transmission / Transmission select lever
The select lever has four positions, “P”, “R”, “N”, “D” and also has a manual gate for using the manual mode.
READ NEXT:
P (Park)
This position is for parking the vehicle and starting the engine.
In this position, the transmission is mechanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, f
R (Reverse)
This position is for backing the vehicle. To shift from the “N” to “R” position,
stop the vehicle completely then move the lever to the “R” position.
N (Neutral)
This position is for restarting a stalled engine.
In this position the wheels and transmission are not locked. In this position,
the transmission is neutral; the vehicle will roll freely, even on t
SEE MORE:
Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated.
2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads
a direction.
3. You can also calibrate the compass by driving your vehicle on your everyday routine.
The compass will be ca
Differential Gear Oil in Continuously Variable Transmission
A: INSPECTION
Check that there is no leakage of differential gear oil from the converter case.
B: ADJUSTMENT
NOTE: Immediately after removing the overflow drain plug, remaining gear oil (approx. 8 cc) may come out of the overflow pipe. This is not included in the specified amount. When removing
© 2010-2024 Copyright www.suoutback.com
