Subaru Outback manuals

Subaru Outback (BR): Stowage of the cargo area cover

The cargo area cover can be stowed in under the cargo floor.

1. To open the lid, pull the handle up.


1. To open the lid, pull the handle up.

2. To keep the lid open, hang the hook (provided on the back of the lid) on the


2. To keep the lid open, hang the hook (provided on the back of the lid) on the rear edge of the roof.

3. Remove the left and right parts of the cargo floor lid.


3. Remove the left and right parts of the cargo floor lid.

4. Stow the cover housing in the cargo area end.


4. Stow the cover housing in the cargo area end.

READ NEXT:

 To install the cover housing

1. To install the cover housing, insert both ends of the cover housing into the retainers. 2. Make sure to fix the front part of the cargo area cover behind the rear seat.

 Convenient tie-down hooks (if equipped)

CAUTION The convenient tie-down hooks are designed only for securing light cargo. Never try to secure cargo that exceeds the capacity of the hooks. The maximum load capacity is 44 lbs (20 kg) per

 Under-floor storage compartment

The subfloor storage compartment is located under the floor of the trunk or cargo area and can be used to store small items. To open the lid, pull the tab or handle up. NOTE When storing a flat

SEE MORE:

 Warranties and maintenance

vehicle damage or malfunction caused by trailer towing. If you use your vehicle to tow a trailer, more frequent maintenance will be required due to the additional load. (Refer to “Maintenance schedule under severe driving conditions” in the “Warranty and Maintenance Booklet”.) Under n

 General Description of Mechanical

A: SPECIFICATION NOTE: US: Undersize OS: Oversize B: COMPONENT 1. V-BELT V-belt V-belt cover bracket V-belt tensioner ASSY Power steering pump bracket Generator Generator plate A/C compressor bracket A Idler pulley ASSY Stopper rod RH S

© 2010-2024 Copyright www.suoutback.com