Subaru Outback (BR): Printed antenna
CAUTION
Do not use sharp instruments or window cleaner containing abrasives to clean
the inner surface of the window on which the antenna is printed. Doing so may damage
the antenna printed on the window.
The antenna is printed on the inner surface of the rear window glass.
NOTE
Antenna performance will deteriorate significantly if you apply tinting film
or any other material over the antenna portion of the rear window glass.
READ NEXT:
Although FM is normally static free, reception can be affected by the surrounding
area, atmospheric conditions, station strength and transmitter distance. Buildings
or other obstructions may cause
Your SUBARU may be equipped with one of the following audio sets. See the pages
indicated in this section for operating details.
NOTE
If a cell phone is placed near the audio set, it may cause the
SEE MORE:
NOTE
For details about how to check the coolant level or how to add coolant, refer
to “Engine coolant” F11-17.
1. Keep the engine running at idling speed.
2. Open the hood to ventilate the engine compartment. Refer to “Engine hood”
F11-7.
Confirm that the cooling fan is turning. If t
When the fluid level has to be checked without time to warm up the automatic
transmission, check to see that the fluid level is between the lower level and upper
level on the “COLD” range. If it is below that range, add fluid up to the upper
level. Be careful not to overfill.
CAUTION
Be
© 2010-2024 Copyright www.suoutback.com