Subaru Outback manuals

Subaru Outback (BR): Ventilation

To force outside air through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position.

2. Press the “3. Set the temperature control dial all the way left.” button.


3. Set the temperature control dial all the way left.

4. Set the fan speed control dial to the desired speed.

When driving on a dusty road, set the air inlet control button to the ON position.

WARNING

Continued operation in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears.

READ NEXT:

 Air conditioner operation

 Cooling or dehumidifying

For cooling and dehumidification of the passenger compartment, air flows through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button

 Defrosting or defogging

To direct warm air to the windshield and front door windows: 1. Press the “” button. 2. Set the temperature control dial to the red side. 3. Set the fan speed control dial at the highest speed.

SEE MORE:

 Intake Manifold

A: REMOVAL 1. INTAKE MANIFOLD 1) Release the fuel pressure. 2) Disconnect the ground cable from battery. 3) Open the fuel filler lid and remove the fuel filler cap. 4) Remove the cover (A) and clip (B) from air intake boot assembly. 5) Loosen the clamp (A) which connects the air intake boot asse

 Effect vehicle modifications made for persons with disabilities may have on SUBARU advanced frontal airbag system operation (U.S. only)

Changing or moving any parts of the front seats, seat belts, front bumper, front side frame, instrument panel, combination meter, steering wheel, steering column, tire, suspension or floor panel can affect the operation of the SUBARU advanced airbag system. If you have any questions, you may c

© 2010-2024 Copyright www.suoutback.com