Subaru Outback manuals

Subaru Outback (BR): Defrosting or defogging the windshield

To direct warm air to the windshield and front door windows:

1. Set the air inlet selection button to the OFF position.

2. Press the “3. Turn the temperature control dial all the way to the right.” button.


3. Turn the temperature control dial all the way to the right.

4. Set the fan speed control dial to the highest speed.

READ NEXT:

 Heating and defrosting

To direct warm air toward the floor and the windshield: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Set the temperature control dial to the most comfor

 Heating

To direct warm air toward the floor: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Set the temperature control dial to the most comfortable level. 4. Se

 Bi-level heating

This setting allows you to direct air of different temperatures from the instrument panel and foot outlets. The air from the foot outlets is slightly warmer than from the instrument panel outlets.

SEE MORE:

 Instrument Panel Assembly

A: REMOVAL CAUTION: Be careful not to damage the airbag system harness when servicing the instrument panel. Damage may cause the system to malfunction. 1) Disconnect the ground cable from battery. 2) Remove the console front cover assembly. MT model 1. Remove the shift knob. 2. Release the cli

 Shift lock release

If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the select lever button pressed and brake pedal depressed. If the select lever does not move after performing the above procedure, perform the

© 2010-2024 Copyright www.suoutback.com