Subaru Outback manuals

Subaru Outback (BR): Convex mirror (passenger side)

WARNING

Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of objects that you view in convex mirror.

Remote control mirror switch

The remote control mirrors operate only when the ignition switch is in the “ON”


The remote control mirrors operate only when the ignition switch is in the “ON” or “Acc” position.

1. Turn the knob to the “L” side to adjust the left-hand mirror or to the “R” side to adjust the right-hand mirror.

2. Move the knob in the direction you want to move the mirror.

3. Return the knob to the neutral position to prevent unintentional operation.

The mirrors can also be adjusted manually.

The remote control mirrors operate only when the ignition switch is in the “ON” or “Acc” position.

1. Turn the knob to the “L” side to adjust the left-hand mirror or to the “R” side to adjust the right-hand mirror.

2. Move the knob in the direction you want to move the mirror.

3. Return the knob to the neutral position to prevent unintentional operation.

The mirrors can also be adjusted manually.

READ NEXT:

 Tilt/telescopic steering wheel

WARNING Do not adjust the steering wheel tilt/ telescopic position while driving. This may cause loss of vehicle control and result in personal injury. 1. Adjust the seat position. Refer to “F

 Horn

To sound the horn, push the horn pad.

 Climate control

SEE MORE:

 Passenger’s frontal airbag ON and OFF indicators

The front passenger’s frontal airbag ON and OFF indicators show you the status of the front passenger’s SRS frontal airbag. The indicators are located next to the clock in the center portion of the dashboard. When the ignition switch is turned to the “ON” position, both the ON and O

 Rear Shelf Trim

A: REMOVAL 1) Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. CAUTION: The airbag system is fitted with a backup power supply. After disconnecting the battery ground cable, the airbag may operate if you do not wait for 60 seconds before starting the

© 2010-2024 Copyright www.suoutback.com