Subaru Outback (BR): Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the
compass zone setting is correct for your geographical location.
2. Press and hold the compass display button for 3 seconds until the zone selection
comes up (a number will be displayed in the mirror compass window).
3. Press the compass display button repeatedly until the correct zone setting
for your location is displayed.
4. Releasing the button for 5 seconds will exit the zone setting mode.
READ NEXT:
SEE MORE:
A: REMOVAL
1) Change the front hood damper mounting position
from (A) to (B), and completely open the front
hood.
Tightening torque:
20 N*m (2.0 kgf-m, 14.8 ft-lb)
2) Disconnect the ground cable from battery.
3) Remove the radiator main fan motor assembly
and radiator sub fan motor assembly. <R
1) Under-floor storage compartment (Refer to “Under-floor storage compartment” F6-18.)
2) Electronic parking brake release tool 3) Jack handle
4) Spare tire
5) Tool bucket
1) Wheel nut wrench
2) Screwdriver
3) Jack
4) Towing hook (eye bolt) (if equipped)
The
© 2010-2024 Copyright www.suoutback.com