Subaru Outback manuals

Subaru Outback (BR): Compass calibration zones

Compass calibration zones

Calibration Zones for Compass

1. Check the "Compass calibration zones" map displayed above to ensure that the compass zone setting matches your geographic area accurately.

2. Hold down the switch for 6 seconds until the zone selection menu appears (a number will appear in the mirror compass window).

3. Press the switch multiple times until the appropriate zone setting for your location is shown.

4. Let go of the button after 10 seconds to exit the zone setting mode.

 

READ NEXT:

 Compass calibration

1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You can a

 Auto-dimming mirror with compass and HomeLink® (if equipped)

1) HomeLink® button 1 2) HomeLink® button 2 3) LED 4) HomeLink® button 3 5) Sensor 6) Automatic dimming on/off button 7) Compass display button 8) Compass display The auto-dimming mirror

 Photosensors

The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim

SEE MORE:

 Before checking or servicing in the engine compartment

WARNING ● Always stop the engine and apply the parking brake to prevent the vehicle from moving. ● Always let the engine cool down. Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped. ● Do not spill engine oil, en

 Steps to take if EBD system malfunctions

If a malfunction occurs in the EBD system, the system stops working and the brake system warning light and ABS warning light illuminate simultaneously. The EBD system may be malfunctioning if the brake system warning light and ABS warning light illuminate simultaneously during driving. Even

© 2010-2024 Copyright www.suoutback.com