Subaru Outback (BR): Washer
To wash the rear window while the rear wiper is operating, turn the knob on the
end of the wiper control lever upward to the “
”
position. The washer fluid sprays until you release the knob. To wash the rear window
when the rear wiper is not in use, turn the knob on the end of the wiper control
lever downward to the “” position. The
washer fluid sprays and the wiper operates until you release the knob.
READ NEXT:
Defogger and deicer
1) Rear window defogger
2) Outside mirror defogger (if equipped)
3) Windshield wiper deicer (if equipped)
The vehicle is equipped with a rear window defogger. Some models are also equipped
with
Mirrors
Always check that the inside and outside mirrors are properly adjusted before
you start driving.
Type A inside mirror (if equipped)
The mirror has a day and night position. Pull the tab at the bottom of the mirror
toward you for the night position. Push it away for the day position. The night
position reduces glare from head
SEE MORE:
Activating and deactivating the alarm system
To change the setting of your vehicle’s alarm system for activation or deactivation,
do the following.
1. Disarm the alarm system. Refer to “Disarming the system” F2-18.
2. Sit in the driver’s seat and shut all doors (and the rear gate (Outback)).
3. Turn the ignition switch to the “O
Outback License plate light
1. Remove the mounting screws using a Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens.
6. Tighten the mounting screws.
© 2010-2024 Copyright www.suoutback.com
