Subaru Outback (BR): Illumination brightness control
The illumination brightness of the clock display, audio, air conditioner, multi
function display and meter/gauge dims under the following conditions.
● when the light switch is in the “ ” or “ ” position
● when the light switch is in the “AUTO” position and the headlights illuminate
automatically
You can adjust the illumination brightness for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
● When the control dial is turned fully upward, the illumination brightness becomes
the maximum and the automatic dimming function does not work at all.
● The brightness setting is not canceled even when the ignition switch is turned
to the “LOCK” position.
READ NEXT:
The front fog lights operate under the following conditions.
● when the light switch is in the “”
position
● when the light switch is in the “AUTO” position and the headlight
WARNING
In freezing weather, do not use the windshield washer until the windshield is
sufficiently warmed by the defroster.
Otherwise the washer fluid can freeze on the windshield, blocking your v
The wiper operates only when the ignition switch is in the “ON” position.
SEE MORE:
A: REMOVAL
1. SEDAN MODEL
Rear combination light side
1) Disconnect the ground cable from battery.
2) Release the lock and remove the bulb inspection cover of trunk room trim.
3) Remove the bulb socket and tail light/stop light bulb.
Rear finisher light side
1) Disconnect the ground cable f
WARNING
● When you fold down the seatback, check that there are no passengers or objects on the rear seat. Not doing so creates a risk of injury or property damage if the seatback suddenly folds down.
● Never allow passengers to ride on the folded rear seatback or in the cargo area or trunk
© 2010-2024 Copyright www.suoutback.com