Subaru Outback (BR): Headlights
To turn on the headlights, turn the knob on the end of the turn signal lever.
first position
Instrument panel illumination, tail lights, front side marker lights and license
plate lights are on.
second position
Headlights, instrument panel illumination, front side marker lights, tail lights
and license plate lights are on.
Auto on/off headlights
When the ignition switch is in the “ON” position, the headlights, instrument
panel illumination, front side marker lights, tail lights and license plate lights
are automatically on or off depending on the level of the ambient light.
NOTE
The sensitivity of the auto on/off headlights can be changed by your SUBARU dealer.
Contact your SUBARU dealer for details.
READ NEXT:
The sensor is on the instrument panel as shown in the illustration.
CAUTION
If any object is placed on or near the sensor, the sensor may not detect the
level of the ambient light correctly and
To change from low beam to high beam, push the turn signal lever forward. When
the headlights are on high beam, the high beam indicator light “”
on the combination meter is also on.
To swit
CAUTION
Do not hold the lever in the flashing position for more than just a few seconds.
To flash the headlights, pull the lever toward you and then release it. The high
beam will stay on for as
SEE MORE:
A: REMOVAL
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module.
<Ref. to AB-9,
CAUTION, General Description.>
1) Position the front wheels straight ahead. (After moving a vehicle 5 m (16
ft) or more with front wheels positioned
straight ahead, make sure tha
A: INSPECTION
1) Park the vehicle on a level surface.
2) Check the clutch fluid level using the scale on
the outside of the reservoir tank. If the clutch fluid
level is below "MIN", fill the clutch fluid up to "MAX"
level, and make sure that there is no leakage.
MAX. level
MIN. level
Reservoir
© 2010-2024 Copyright www.suoutback.com