Subaru Outback (BR): Indicator light for cruise control in Outback (2010-2015)
The indicator light for cruise control becomes illuminated upon turning the ignition switch to the “ON” position and remains lit for around 3 seconds. Activation of this light also occurs when the “CRUISE” main switch is pressed.
It's worth noting that if you press the main switch button while simultaneously turning on the ignition switch, the cruise control function will be deactivated, and the “CRUISE” indicator light will start flashing. To reactivate the cruise control function, simply turn the ignition switch back to either the “Acc” or “LOCK” position, and then turn it back to the “ON” position.
However, if you notice that this indicator light and the CHECK ENGINE warning light or malfunction indicator lamp are flashing simultaneously while driving, it is advisable to promptly have your vehicle inspected by the nearest SUBARU dealer.
.webp)
In conclusion, understanding the behavior of the cruise control indicator light and knowing how to reactivate the cruise control function is essential for optimal vehicle performance and safety. Keeping an eye on any unusual flashing of indicator lights and promptly addressing any issues through professional inspection can help ensure smooth and trouble-free driving experiences.
READ NEXT:
Cruise control set indicator light
The cruise control set indicator light illuminates when the ignition switch is
turned to the “ON” position and turns off after approximately 3 seconds.
This light illuminates when vehicle spe
Headlight indicator light
This indicator light illuminates under the following conditions.
● when the light switch is turned to the “”
or “” position
● when the light switch is in the “AUTO” posit
Front fog light indicator light (if equipped)
This indicator light illuminates while the front fog lights are illuminated.
SEE MORE:
Tire care – maintenance and safety practices
● Check on a daily basis that the tires are free from serious damage, nails,
and stones. At the same time, check the tires for abnormal wear.
● Inspect the tire tread regularly and replace the tires before their tread wear
indicators become visible. When a tire’s tread wear indica
Rear Door
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear door trim. <Ref. to EI-61, REAR DOOR, REMOVAL, Door Trim.>
3) Remove the rear door speaker assembly.
Remove the screws.
Disconnect the harness connector and remove the rear speaker assembly.
4) Remove the rear se
