Subaru Outback (BR): Turn signal indicator lights
These lights show the operation of the turn signal or lane change signal.
If the indicator lights do not blink or blink rapidly, the turn signal bulb may
be burned out. Replace the bulb as soon as possible. Refer to “Replacing bulbs”
F11-48.
READ NEXT:
This light shows that the headlights are in the high beam mode.
This indicator light also illuminates when the headlight flasher is operated.
The indicator light for cruise control becomes illuminated upon turning the ignition switch to the “ON” position and remains lit for around 3 seconds. Activation of this light al
The cruise control set indicator light illuminates when the ignition switch is
turned to the “ON” position and turns off after approximately 3 seconds.
This light illuminates when vehicle spe
SEE MORE:
CAUTION
The convenient tie-down hooks are designed only for securing light cargo. Never
try to secure cargo that exceeds the capacity of the hooks. The maximum load capacity
is 44 lbs (20 kg) per hook.
The cargo area is equipped with four tiedown hooks so that cargo can be secured
with a l
A: REMOVAL
1. SEDAN MODEL
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module.
<Ref. to AB-9,
CAUTION, General Description.>
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and wait for at least 60 seconds
before starting wo
© 2010-2024 Copyright www.suoutback.com