Subaru Outback (BR): For CVT models
This light illuminates when All-Wheel Drive is disengaged and the drive mechanism
is switched to Front Wheel Drive for maintenance or similar purposes. This light
flashes if the vehicle is driven with tires of different diameters fitted on its
wheels or with the air pressure excessively low in any of its tires.
READ NEXT:
The light illuminates when the ignition switch is turned to the “ON” position and turns off several seconds after the engine has started. This lighting pattern indicates that the Vehicle
CAUTION
The Vehicle Dynamics Control system provides its ABS control through the electrical
circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics
Control system
The indicator light flashes during activation of the skid suppression function
and during activation of the traction control function.
NOTE
● The light may remain illuminated for a short per
SEE MORE:
Disc select buttons
1. Use the disc select button to select the disc to be ejected.
2. Briefly press the “” button. The
selected disc will be ejected. The disc number indicator will flash at this time.
When you remove the ejected disc, the disc number indicator will turn off. To remove
A: REMOVAL
1. SEDAN MODEL
1) Remove the rear seat cushion.
Pull up the seat cushion and release the hook.
CAUTION:
If the hook is removed from vehicle body, replace the hook with the new part to
avoid the deterioration
of seat securing.
Remove the hook (A) by pushing it back while lifting th
© 2010-2024 Copyright www.suoutback.com