Subaru Outback (BR): Hazard warning flasher
The hazard warning flasher is used to warn other drivers when you have to park
your vehicle under emergency conditions. The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher, press the hazard warning button on the
instrument panel. To turn off the flasher, press the button again.
NOTE
When the hazard warning flasher is on, the turn signals do not work.
READ NEXT:
NOTE
Liquid crystal displays are used in some of the meters and gauges in the combination
meter. You will find their indications hard to see if you wear polarized glasses.
When the ignition switch is turned to the “ON” position, the various parts of
the combination meter are illuminated in the following sequence.
1. Warning lights, indicator lights, meter needles
It is possible to activate or deactivate the movement of the meter needles and
gauge needles that takes place when the ignition switch is turned to the “ON” position.
1. Turn the ignition swi
SEE MORE:
A: REMOVAL
1) Change the front hood damper mounting position
from (A) to (B), and completely open the front
hood.
Tightening torque:
20 N*m (2.0 kgf-m, 14.8 ft-lb)
2) Disconnect the ground cable from battery.
3) Remove the radiator main fan motor assembly
and radiator sub fan motor assembly. <R
If you press the “” or “”
side of the “SEEK” button briefly, the radio will automatically search for a receivable
station and stop at the first one it finds. This function may not be available,
however, when radio signals are weak. In such a situation, perform manual tuning
to
© 2010-2024 Copyright www.suoutback.com