Subaru Outback manuals

Subaru Outback (BR): Ignition switch light

For easy access to the ignition switch in the dark, the ignition switch light illuminates when driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry transmitter.

The light remains illuminated for approximately 30 seconds and gradually turns off under the following conditions.

● When the driver’s door is closed ● When the doors are unlocked using the remote keyless entry transmitter

The light gradually turns off under the following conditions.

● When the ignition switch is turned to the “ON” position ● When the doors are locked using the remote keyless entry transmitter

READ NEXT:

 Hazard warning flasher

The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position.

 Meters and gauges

NOTE Liquid crystal displays are used in some of the meters and gauges in the combination meter. You will find their indications hard to see if you wear polarized glasses.

 Combination meter illumination

When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence. 1. Warning lights, indicator lights, meter needles

SEE MORE:

 Cylinder Head

A: REMOVAL NOTE: When replacing a single part, perform the work with the engine assembly installed to body. Refer to "Valve Clearance" for preparation procedures. <Ref. to ME(H4SO)-29, Valve Clearance.> When performing the work with the engine installed to body, the following parts must

 Compass calibration

1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You can also calibrate the compass by driving your vehicle on your everyday routine. The compass will be ca

© 2010-2024 Copyright www.suoutback.com