Subaru Outback (BR): Acc
In this position the electrical accessories (radio, accessory power outlet, etc.) can be used.
READ NEXT:
ON
This is the normal operating position after the engine is started.
START
CAUTION
Do not turn the ignition switch to the “START” position while the engine is running.
The engine is started in this position. The starter cranks the engine to start
it. When the key is
Key reminder chime
The reminder chime sounds when the driver’s door opens and the key is in the
“LOCK” or “Acc” positions. The chime stops when the ignition switch is turned to
the “ON” position or the
SEE MORE:
Reverse Brake Assembly
A: REMOVAL
NOTE:
For removal of reverse brake assembly, refer to "Intermediate Case". <Ref. to
CVT-165, REMOVAL, Intermediate
Case.>
B: INSTALLATION
NOTE:
For removal of reverse brake assembly, refer to "Intermediate Case". <Ref. to
CVT-166, INSTALLATION, Intermediate
Case.>
C: DISASSE
DTC 41, 42, 45, 46, 4A, 4B, 4D, 4E, 53, 54, 55, 58, 59, 5A, 5B, 5C, 5D, 61,
62, 65, 66, 6A, 6B, 6D, 6E
W: DTC 41 SIDE AIRBAG RH FAILURE
NOTE:
Be sure to properly identify the Airbag system type prior to performing any
diagnostics.
1. TYPE A
DTC DETECTING CONDITION:
Side airbag harness (RH) is faulty.
Side airbag module (RH) is faulty.
Airbag control module is faulty.
CAUTION:
Before performing
© 2010-2024 Copyright www.suoutback.com
