Subaru Outback (BR): LOCK
The key can only be inserted or removed in this position. The ignition switch will lock the steering wheel when you remove the key.
If turning the key is difficult, turn the steering wheel slightly to the right and left as you turn the key.
The key can be turned from “Acc” to “LOCK” only when the key is pushed in while turning it (all models) and the select lever is in the “P” position (AT and CVT models).
READ NEXT:
Acc
In this position the electrical accessories (radio, accessory power outlet, etc.)
can be used.
ON
This is the normal operating position after the engine is started.
START
CAUTION
Do not turn the ignition switch to the “START” position while the engine is running.
The engine is started in this position. The starter cranks the engine to start
it. When the key is
SEE MORE:
Headlight Bulb
A: REMOVAL
1. HIGH BEAM
CAUTION:
Because the halogen bulb operates at a high temperature, dirt and oil
on the bulb surface reduces
the bulb's service life. Hold the flange portion when replacing the bulb.
Never touch the glass portion.
Do not leave the headlight without a bulb for a long tim
Behavior with key lock-in prevention function non-operational
● If the lock lever is turned to the rear (“LOCK”) position with the driver’s
door open and the driver’s door is then closed with the lock lever in that position,
the driver’s door is locked. . If the spare key is used to lock the driver’s door
from the outside of the vehicle
© 2010-2024 Copyright www.suoutback.com
