Subaru Outback (BR): Tilting moonroof
1) Raise
2) Lower
The raising function will only operate when the moonroof is fully closed. The
lowering function will only operate when the moonroof is raised.
Press the rear side of the “UP/DOWN” switch to raise the moonroof. Press the
front side of the “UP/DOWN” switch to lower the moonroof.
Release the switch after the moonroof has been raised or has been lowered completely.
Pressing the switch continuously may cause damage to the moonroof.
NOTE
One-touch operation does not take place when the moonroof is lowered. Press the
switch continuously to lower the moonroof.
READ NEXT:
1) Open
2) Close
Press the “OPEN/CLOSE” switch rearward to open the moonroof. The sun shade will
also be opened together with the moonroof. For Outback, the moonroof will stop at
a position
If the moonroof detects a significant object caught between its glass and the vehicle's roof while closing, it will automatically retract to the fully open position and halt. The anti-entrapment featu
The sun shade can be slid forward or backward by hand while the moonroof is closed.
If the moonroof is opened, the sun shade also moves back.
SEE MORE:
SRS airbag system warning light
A diagnostic system continually monitors the readiness of the seatbelt pretensioner
while the vehicle is being driven. The seatbelt pretensioners share the control
module with the airbag system. Therefore, if any malfunction occurs in a seatbelt
pretensioner,
Models with automatic climate control system:
After the system starts the engine, the automatic climate control system will
activate the “FULL AUTO” mode and heat or cool the interior to the predetermined
median (room) temperature. No presetting of controls is necessary.
Models with manual
© 2010-2024 Copyright www.suoutback.com