Subaru Outback (BR): Initialization of power window
Subaru Outback (BR) 2010-2015 Owners Manual / Keys and doors / Windows / Initialization of power window
If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated.
● One-touch auto up/down function ● Anti-entrapment function
Initialize the power window in the following procedure to reactivate such functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON” position.
3. Open the driver’s side window halfway by pushing down the power window switch.
4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.
READ NEXT:
Rear gate (Outback)
The rear gate can be locked and unlocked using any of the following systems.
● Power door locking switch: Refer to “Power door locking switches” F2-7.
● Remote keyless entry system
Moonroof (if equipped)
WARNING
Never let anyone’s hands, arms, head or any objects protrude from the moonroof.
A person could be seriously injured if the vehicle stops suddenly or turns sharply
or if the vehicle is i
SEE MORE:
Extension Case Oil Seal
A: INSPECTION
Inspect there is no ATF leakage from the joint of
transmission and propeller shaft. If a leak is found,
replace the oil seal. <Ref. to 5AT-48, REPLACEMENT,
Extension Case Oil Seal.>
B: REPLACEMENT
1) Lift up the vehicle.
2) Clean the transmission exterior.
3) Remove the ATF dra
System alarm operation
The alarm system will give the following alarms when triggered:
● The vehicle’s horn will sound and the turn signal lights will flash for 30
seconds.
● If any door (or the rear gate/trunk lid) remains open after the 30-second period,
the horn will continue to sound for a maximum
© 2010-2024 Copyright www.suoutback.com
