Subaru Outback (BR): System alarm operation
The alarm system will give the following alarms when triggered:
● The vehicle’s horn will sound and the turn signal lights will flash for 30
seconds.
● If any door (or the rear gate/trunk lid) remains open after the 30-second period,
the horn will continue to sound for a maximum of 3 minutes. If the door (or the
rear gate/trunk lid) is closed while the horn is sounding, the horn will stop sounding
with a delay of up to 30 seconds.
The alarm is triggered by:
● Opening a door, the rear gate or trunk lid
● Physical impact to the vehicle, such as forced entry (only models with shock sensors
(dealer option))
NOTE
The alarm system can be set to trigger illumination of map lights and dome light.
The map lights and dome light notification is deactivated as the factory setting.
Refer to “Function settings” F20. A SUBARU dealer can activate the system. Contact
your SUBARU dealer for details.
READ NEXT:
To change the setting of your vehicle’s alarm system for activation or deactivation,
do the following.
1. Disarm the alarm system. Refer to “Disarming the system” F2-18.
2. Sit in the driver
To stop the alarm
Perform any of the following operations.
● Press any button on the remote transmitter.
● Turn the ignition switch to the “ON” position.
SEE MORE:
A: REMOVAL
1) Lift up the vehicle, and then remove the rear wheels.
2) Remove the axle nut.
CAUTION: Do not loosen the axle nut while the rear axle is loaded. Doing so may damage the hub bearing.
Lift the crimped section of axle nut.
Remove the axle nut using a socket wrench while de
WARNING
● When you fold down the seatback, check that there are no passengers or objects on the rear seat. Not doing so creates a risk of injury or property damage if the seatback suddenly folds down.
● Never allow passengers to ride on the folded rear seatback or in the cargo area or trunk
© 2010-2024 Copyright www.suoutback.com