P Metric

With the P-Metric system, Section Width is measured in millimeters.

To convert millimeters into inches, divide by 25.4. The Aspect Ratio (Section Height divided by Section Width) helps provide more dimensional information about the tire size.

Example:

(1) P = Certain tire type used on light duty vehicles such as passenger cars

(1) P = Certain tire type used on light duty vehicles such as passenger cars
(2) Section Width in millimeters
(3) Aspect Ratio (= section height 7 section width).
(4) R = Radial Construction
(5) Rim diameter in inches

    See also:

    Brake booster
    If the brake booster does not operate as described in the following procedure, have it checked by your SUBARU dealer. 1. With the engine off, depress the brake pedal several times, applying the sam ...

    Light control switch
    The light control switch only operates when the key is inserted into the ignition switch. Regardless of the position of the light control switch, the illuminated lights are turned off when the ke ...

    Measuring and adjusting air pressure to achieve proper inflation
    Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pressure gaug ...