Washing the underbody
Chemicals, salts and gravel used for deicing road surfaces are extremely corrosive, accelerating the corrosion of underbody components, such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders, and suspension.
Thoroughly flush the underbody and inside of the fenders with lukewarm or cold water at frequent intervals to reduce the harmful effects of such agents.
Mud and sand adhering to the underbody components may accelerate their corrosion.
After driving off-road or on muddy or sandy roads, wash the mud and sand off the underbody. Carefully flush the suspension and axle parts, as they are particularly prone to mud and sand buildup. Do not use a sharp-edged tool to remove caked mud.
• Be careful not to damage brake hoses, sensor harnesses, and other parts when washing suspension components.
• Be careful not to flush the engine bottom for a long time. It may cause damage of some electrical parts.
See also:
Subaru Outback vs. Forester
As the table reflects, the Outback starts at a higher price than the Forester
but has slightly less cargo volume, and with the exception of 1 inch of
front-seat legroom, it's smaller than the Fore ...
When there are CDs loaded (type B)
Disc select buttons
Press a desired one of the disc select buttons the disc number indicator of which steadily lights up. The player will then start playback of the selected CD, beginning with the fi ...
Entering the vehicle while it is running via remote
start
1. Unlock the vehicle doors using the
keyless entry system. If the vehicle’s
doors are unlocked manually using the
key, the vehicle’s alarm system will trigger
and the remote engine start syst ...