Rear gate – if the rear gate cannot be unlocked

In the event that you cannot unlock the rear gate by operating the power door locking switches or the remote keyless entry system, you can unlock it from inside the cargo area.

1. Remove the access cover at the bottom-center of the rear gate trim.

1. Remove the access cover at the bottom-center of the rear gate trim.

2. Locate the rear gate lock release lever behind the rear gate trim panel.

Never operate the rear gate lock release lever with fingers because doing so may cause an injury. Always use a flat-head screwdriver or a similar tool.

Never operate the rear gate lock release lever with fingers because doing so may cause an injury. Always use a flat-head screwdriver or a similar tool.

3. To unlock the rear gate, turn the lever to the right position using a flat-head screwdriver or a similar tool.

3. To unlock the rear gate, turn the lever to the right position using a flat-head screwdriver or a similar tool.

4. Open the rear gate from outside by raising the rear gate handle.

    See also:

    Towing and tie-down hooks
    The towing hooks should be used only in an emergency (e.g., to free a stuck vehicle from mud, sand or snow). - Use only the specified towing hook and tie-down hook. Never use suspension p ...

    Tire pressure monitoring system (TPMS) (U.S.-spec. models)
    Type A Type B The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when tire p ...

    Tire pressures
    Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressure when the tires are cold. Use a press ...