Cruise control
Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 25 mph (40 km/h) or more.
Do not use the cruise control under any of the following conditions.
These may cause loss of vehicle control.
• driving up or down a steep grade
• driving on slippery or winding roads
• driving in heavy traffic
NOTE
• If you press the “CRUISE” main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the cruise control indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “Acc” or “LOCK” position, and then turn it again to the “ON” position.
• Make sure the “CRUISE” main switch is turned off when the cruise control is not in use to avoid unintentionally setting of the cruise control.
See also:
Vehicle placard
The vehicle placard is affixed to the
driver’s side B-pillar.
Example:
The vehicle placard shows original
tire size, recommended cold tire
inflation pressure on each tire at
maximum load ...
California Perchlorate Advisory
Certain vehicle components such as airbag modules, seatbelt pretensioners and
keyless entry transmitter batteries may contain perchlorate material. Special handling
may apply for service or vehicl ...
Refueling
Only one person should be involved in
refueling. Do not allow others to approach
the area of the vehicle near the fuel filler
pipe while refueling is in progress.
Be sure to observe any other p ...