Shift lock release using the shift lock release button

Perform the following procedure to release the shift lock.

1. Apply the parking brake and stop the engine.

2. Remove the shift lock cover using a flat-head screwdriver. The shift lock release button is located under the shift lock cover.

2. Remove the shift lock cover using a flat-head screwdriver. The shift lock release button is located under the shift lock cover.

NOTE
To prevent damage to the shift lock cover, cover the tip of the flat-head screwdriver with vinyl tape or a cloth before removing the cover.

3. While depressing the brake pedal, insert a screwdriver into the hole, press the shift lock release button using a screwdriver, and then move the select lever.

3. While depressing the brake pedal, insert a screwdriver into the hole, press the shift lock release button using a screwdriver, and then move the select lever.

If the select lever does not move after performing the above procedure, the shift lock system may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.

    See also:

    Engine oil
    For the checking, adding and replacing procedure or other details, refer to “Engine oil”. NOTE The procedure for changing the engine oil and oil filter should be performed by a properly-trained ...

    Manual transmission, front differential and rear differential gear oil
    For the checking procedure, or other details, refer to “Manual transmission oil”, “Front differential gear oil (AT models)”, “Rear differential gear oil”. ...

    FM selection
    Press the “FM” button when the radio is on to select FM1, FM2 or FM3 reception. Each brief press of the “FM” button changes the radio in the following sequence starting from the last FM radio ban ...