P (Park)
This position is for parking the vehicle and starting the engine.
In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely.
When you park the vehicle, first set the parking brake fully, then shift into the “P” position. Do not hold the vehicle with only the transmission.
To shift the select lever from the “P” to any other position, you should depress the brake pedal fully then move the select lever. This prevents the vehicle from lurching when it is started.
See also:
Calculating total and load capacities varying seating configurations
Calculate the available load capacity as shown in the following examples:
Example 1A
Vehicle capacity weight of the vehicle is 800 lbs (363 kg), which is indicated
on the vehicle placard with th ...
Center ventilators
Center ventilators
Move the tab to adjust the flow direction. ...
To hook the top tether
1. Remove the headrest at the windowside
seating position where the child
restraint system has been installed with
the lower anchorages or seatbelt; lift up
the headrest while pressing the r ...