Selecting reverse gear
1) Slider
You must raise the slider and hold it in that position before you can move the shift lever to the “R” position.
To change gears, fully depress the clutch pedal, move the shift lever, and gradually let up on the clutch.
If it is difficult to shift into gear, put the transmission in neutral, release the clutch pedal momentarily, and then try again.
Shift into reverse ONLY when the vehicle has completely stopped. It may cause damage to the transmission to try shifting into reverse when the vehicle is moving.
See also:
R (Reverse)
This position is for backing the vehicle.
To shift from the “N” to “R” position, stop
the vehicle completely then move the
lever to the “R” position.
When the ignition switch has been turned
t ...
If no steam is coming from the engine compartment
NOTE
For details about how to check the
coolant level or how to add coolant,
refer to “Engine coolant”.
1. Keep the engine running at idling
speed.
2. Open the hood to ventilate the engine
...
Cleaning aluminum wheels
● Promptly wipe the aluminum wheels clean of any kind of grime or agent. If dirt
is left on too long, it may be difficult to clean off.
● Do not use soap containing grit to clean the wh ...