To engage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “
” button on the remote engine start transmitter three times. The system will pause for 1 second and then flash the turn signal lights and honk the horn three times indicating that the system is in service mode. When attempting to activate the remote start system while in service mode, the turn signal lights will flash and the horn will honk two times and will not start.
See also:
Taking a phone call and declining an incoming call
To take a phone call: Press the OFF hook switch0
.
To put an incoming call on hold: Press the ON hook switch briefly
.
To decline an incoming call: Press the ON hook switch
for more than 1.5 sec ...
Before checking or servicing in the engine compartment
- Always stop the engine and set
the parking brake firmly to prevent
the vehicle from moving.
- Always let the engine cool down.
Engine parts become very hot
when the engine is running and ...
Rear center seating position
The head restraint is not intended to
be used at the lowest position.
Before sitting on the seat, raise the
head restraint to an appropriate
position depending on your sitting
height.
...