Subaru Outback (BR): Forward and backward adjustment
Subaru Outback (BR) 2010-2015 Owners Manual / Seat, seatbelt and SRS airbags / Front seats / Manual seat / Forward and backward adjustment
Pull the lever upward and slide the seat to the desired position. Then release the lever and try to move the seat back and forth to make sure that it is securely locked into place.
READ NEXT:
Reclining the seatback
WARNING
To prevent the passenger from sliding under the seatbelt in the event of a collision,
always put the seatback in the upright position while the vehicle is in motion.
Also, do no
Seat height adjustment (driver’s seat)
1) When the lever is pushed down, the seat is lowered.
2) When the lever is pulled up, the seat rises.
The height of the seat can be adjusted by moving the seat cushion adjustment
lever up or do
Power seat (if equipped)
WARNING
To prevent the passenger from sliding under the seatbelt in the event of a collision,
always put the seatback in the upright position while the vehicle is in motion.
Also, do not place
SEE MORE:
Clutch Pedal
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the collector cover. (turbo model)
3) Remove the air intake boot assembly. (non-turbo
model) <Ref. to IN(H4SO)-8, INSTALLATION,
Air Intake Boot.>
4) Remove the intercooler. (turbo model) <Ref. to
IN(H4DOTC)-17, REMOVAL,
Tilting moonroof
1) Raise
2) Lower
The raising function will only operate when the moonroof is fully closed. The
lowering function will only operate when the moonroof is raised.
Press the rear side of the “UP/DOWN” switch to raise the moonroof. Press the
front side of the “UP/DOWN” switch to lower t
© 2010-2024 Copyright www.suoutback.com
