Fan speed control dial

The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the desired fan speed. The dial’s positions and their functions are as follows.
Fan speed control dial

The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the desired fan speed. The dial’s positions and their functions are as follows.

OFF: The fan does not operate.

AUTO: The fan speed is adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. SUBARU recommends using the AUTO position.

Other positions: The fan speed can be adjusted in 7 steps.

NOTE
With the fan speed control dial in the AUTO position and the airflow control dial in the “or “” position, the fan does not operate during engine warm-up until the engine coolant temperature exceeds approximately 1228F (508C).”, “or “” position, the fan does not operate during engine warm-up until the engine coolant temperature exceeds approximately 1228F (508C).”, or “Temperature control dial” position, the fan does not operate during engine warm-up until the engine coolant temperature exceeds approximately 1228F (508C).

    See also:

    Parking brake warning
    The light illuminates with the parking brake applied while the ignition switch is in the “ON” position. It turns off when the parking brake is released. ...

    Overhead console
    To open the console, push on the lid lightly and it will automatically open. CAUTION When your vehicle is parked in the sun or on a warm day, the inside of the overhead console heats up. Avoid s ...

    Brake fluid level warning
    This light illuminates when the brake fluid level has dropped to near the “MIN” level of the brake fluid reservoir with the ignition switch in the “ON” position and with the parking brake released ...