Headlight beam leveler (if equipped)
The vehicle has High-Intensity Discharge (HID) headlights on the low beam setting.
The HID headlights generate more light than conventional halogen headlights.
Therefore a driver of an oncoming vehicle may experience too much glare when your headlight beam height adjustment is high due to the vehicle carrying a heavy load.
The headlight beam leveler can be used to adjust beam height to avoid such a condition.
Adjust the headlight beam level with the following dial positions according to the number of passengers and load condition.
*: Up to maximum permissible weight
See also:
Tire pressures and wear
Maintaining the correct tire pressures helps to maximize the tires’ service lives
and is essential for good running performance. Check and, if necessary, adjust the
pressure of each tire (includin ...
To increase the speed (by the “RES/ SET” switch)
Press the “RES/SET” switch to the “RES” side and hold it until the vehicle reaches
the desired speed. Then, release the switch. The vehicle speed at that moment will
be memorized and treated as ...
Snow tires
- When replacing original tires with
winter (snow) tires, make sure
you use only the same size,
construction and load range as
the original tires listed on the tire
placard. Using other ...