Light control switch

The light control switch operates when the key is inserted into the ignition switch.

Regardless of the position of the light control switch, the illuminated lights are turned off when the key is removed from the ignition switch.

NOTE
Even if the key is removed from the ignition switch, the lights can be illuminated by operating the light control switch from “OFF” to the “
or “” position. In this case, if the driver’s door is opened, a chirp sound will inform the driver that the lights are illuminated.” or “” position. In this case, if the driver’s door is opened, a chirp sound will inform the driver that the lights are illuminated.

• Use of any lights for a long period of time while the engine is not running can cause the battery to discharge.

• Use of any lights for a long period of time while the engine is not running can cause the battery to discharge.

• Before leaving the vehicle, make sure that the light control switch is turned to the “OFF” position. If the vehicle is left unattended for a long time with the light control switch set to a position other than “OFF”, the battery may be discharged.

See also:

Scan tuning (SCAN)
Type A and B audio Type C audio If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will ...

Operating the HomeLink® Wireless Control System
Once programmed, the HomeLink® Wireless Control System can be used to remote-control the devices to which its buttons are programmed. To activate a device, simply press the appropriate button. ...

Auto-dimming mirror with compass (if equipped)
1) LED 2) Switch 3) Sensor 4) Compass display The auto-dimming mirror has an anti-glare feature which automatically reduces glare coming from headlights of vehicles behind you. It also contain ...