Turn off display of fuel consumption indicator
The display of the fuel consumption indicator can be turned off.
To turn off the display of the indicator, turn the ignition switch to the “LOCK” position and press the “+” button adjacent to the information display for approximately 5 seconds. Then, the information display and the clock display will blink for 3 seconds to notify that the display of the fuel consumption has been turned off.
To restore the indicator, once again press the “+” button for approximately 5 seconds.
NOTE
• The initial display setting of the fuel consumption indicator of your vehicle has been set to operational at the time of shipment from the factory.
• The average fuel consumption is calculated even while the indicator is not displayed.
• Even if you turn off the fuel consumption indicator, the fuel consumption indicator will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement.
See also:
Cargo & Towing
Five-person Tribecas have 37.6 cubic feet of cargo room, and folding the
backseat flat raises the total to 74.4 cubic feet. The seven-seat Tribeca has
only 8.3 cubic feet of space behind the third ...
Installing forward facing child restraint
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
ma ...
Air cleaner element
WARNING
Do not operate the engine with the air cleaner element removed. The air cleaner
element not only filters intake air but also stops flames if the engine backfires.
If the air cleaner eleme ...