Vehicle Dynamics Control operation indicator light
It blinks when the skid suppression function is activated. It illuminates only when the traction control function is operating.
The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.
• The light does not illuminate when the ignition switch is turned to the “ON” position.
• The light does not turn off even after a period of approximately 2 seconds after the ignition switch has been turned to the “ON” position.
See also:
Tires
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to
50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts
by yourself, have the tightening tor ...
Gasoline for California-certified LEV
If your vehicle was certified to California’s low emission vehicle (LEV) standards as indicated on the underhood tune-up label, it is designed to optimize engine and emission performance with gasoline ...
Infants or small children
Use a child restraint system that is suitable for your vehicle. Refer to “Child restraint systems”. ...