Combination meter illumination
When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence:
Turbo models:
1. Warning lights, indicator lights, meter needles and gauge needles illuminate.
2. Meter needles and gauge needles each show MAX position.
3. Meter needles and gauge needles each show MIN position.
4. Meter and gauge dials, odometer and trip meter back light illuminate.
5. Regular illumination (for driving) begins.
Non-turbo models:
1. Warning lights, indicator lights, meter needles, gauge needles, odometer and trip meter back light illuminate.
2. Meter needles and gauge needles each show MAX position.
3. Meter needles and gauge needles each show MIN position.
4. Regular illumination (for driving) begins.
See also:
To use as semi-automatic climate control system
Each function can be individually set to
AUTO mode independently of the others.
Any function set to AUTO mode is controlled
automatically. Any function not set
to AUTO mode can be manually adju ...
Refueling
Only one person should be involved in refueling. Do not allow others to approach
the area of the vehicle near the fuel filler pipe while refueling is in progress.
Be sure to observe any other preca ...
Type B
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in the direction shown in the ...