Initialization of power window (type A)

Subaru Impreza / Subaru Impreza Owners Manual / Keys and doors / Windows / Power windows / Initialization of power window (type A)

If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated.

• One-touch auto up/down function
• Anti-entrapment function

Initialize the power window using the following procedure to reactivate these functions.

1. Close the driver’s door.

2. Turn the ignition switch to the “ON” position.

3. Open the driver’s side window halfway by pushing down the power window switch.

4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.

    See also:

    Car phone/cell phone and driving
    Do not use a car phone/cell phone while driving; it may distract your attention from driving and can lead to an accident. If you use a car phone/cell phone, pull off the road and park in a safe plac ...

    Mist (for a single wipe)
    Mist (for a single wipe) For a single wipe of the wipers, pull the lever toward you. The wipers operate until you release the lever. ...

    Compass zone adjustment
    Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the compass ...