Operating the driver’s window (type A)

1) Automatically open/close
Operating the driver’s window (type A)

1) Automatically open/close
2) Open/close

To open:

Push the switch down lightly and hold it.

The window will open as long as the switch is held.

This switch also has a one-touch auto down feature that allows the window to be opened fully without holding the switch.

Push the switch down until it clicks and release it, and the window will fully open.

To stop the window halfway, pull the switch up lightly.

To close:

Pull the switch up lightly and hold it. The window will close as long as the switch is held.

This switch also has a one-touch auto up feature that allows the window to be closed fully without holding the switch.

Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, push the switch down lightly.

NOTE
If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initialize the power window to reactivate the one-touch auto up/down function.

Refer to “Initialization of power window (type A)”.

    See also:

    Seatbelt warning light and chime
    Your vehicle is equipped with a seatbelt warning device at the driver’s and front passenger’s seat, as required by current safety standards. With the ignition switch turned to the “ON” position, th ...

    Turbo models
    Except STI The engine is designed to operate using premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher. If premium unleaded gasoline is not available, regular unleaded gasoli ...

    “up” and “down” switch
    With radio mode selected Press the switch to the “” or “” side briefly to skip to a preset channel. Press the switch to the “” or “” side for more than 0.5 second to seek the next receivable ...