To arm the system using remote transmitter
1. Close all windows.
2. Remove the key from the ignition switch.
3. Open the doors and get out of the vehicle.
4. Make sure that the engine hood (and the trunk lid on the 4-door) are locked.
5. Close all doors (and the rear gate on the 5-door).
: Press to Arm the system.
: Press to Disarm the system.
Turbo models
Non-turbo models
6. Briefly press the “” button (for less than 2 seconds). All doors (and the rear gate on the 5-door) will lock, an electronic chirp will sound once, the turn signal lights will flash once, and the security indicator light will start flashing rapidly. After rapid flashing for 30 seconds (standby time), the indicator lights will then flash slowly (twice approximately every 2 seconds), indicating that the system has been armed for surveillance.
If any of the doors, (rear gate or trunk lid) is not fully closed, an electronic chirp sounds five times, the turn signal lights flash five times to alert you that the doors (or the rear gate) are not properly closed.
When you close the door, the system will automatically arm and doors will automatically lock.
See also:
Operation
The SRS side airbag and SRS curtain airbag can function only when the ignition
switch is in the “ON” position.
The driver’s and front passenger’s SRS side airbags and SRS curtain airbags deploy
...
Door open warning light
When the ignition switch is in the “ON” position, the door open warning light
illuminates for approximately 2 seconds and then turns off.
The door open warning light illuminates if any door, the ...
Tire Identification Number (TIN)
Tire Identification Number (TIN) is marked on the intended outboard sidewall.
The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown
of its individual elements.
...