Rear center seating position
The head restraint is not intended to be used at the lowest position.
Before sitting on the seat, raise the head restraint to the click position.
1) When not used (lowest position)
2) When used (click position)
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while pressing the release button on the top of the seatback.
To remove:
While pressing the release button, pull out the head restraint.
To install:
Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks.
When the rear-center seating position is occupied, raise the head restraint to an appropriate position depending on your sitting height. When the rear center seating position is not occupied, lower the head restraint to improve rearward visibility.
See also:
Besting Midsize Benchmarks
Built on an all-new platform, the 2010 Subaru Legacy offers roominess
comparable to mainstream midsize sedans, with a focus on usable space and
long-distance driving comfort. The wheelbase grows t ...
Temperature A, B, C
The temperature grades are A (the
highest), B, and C, representing the
tire’s resistance to the generation of
heat and its ability to dissipate heat
when tested under controlled conditions
o ...
Recommended grade and viscosity
Use only engine oil with the recommended
grade and viscosity.
Refer to “Engine oil”.
NOTE
Engine oil viscosity (thickness) affects
fuel economy. Oils of lower viscosity
provide better fu ...