Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic transmission, check to see that the fluid level is between the lower level and upper level on the “COLD” range. If it is below that range, add fluid up to the upper level.
Be careful not to overfill.
Be careful not to spill automatic transmission fluid when adding it.
If automatic transmission fluid touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If automatic transmission fluid gets on the exhaust pipe, be sure to wipe it off.
See also:
Locking the phonebook
1. Select the “PHBK LOCK”/“PHONEBOOK
LOCK” menu. Then “CURRENT
PIN?” is displayed.
2. Input the PIN code by operating the
“TUNE/TRACK/CH” dial or saying the
number.
3. Select the “CONFIRM” m ...
Manual transmission models
Manual transmission models
The key can be turned from “Acc” to
“LOCK” only when the key is pushed in
while turning it. ...
Programming the transmitters
The remote keyless entry system is equipped with a special code learning feature that allows you to program new transmitter codes into the system or to delete old ones. The system can learn up to four ...