Engine hood

To open the hood:

1. If the wiper blades are lifted off the windshield, return them to their original position.

2. Pull the hood release knob under the

2. Pull the hood release knob under the instrument panel.

3. Release the secondary hood release

3. Release the secondary hood release by moving the lever between the front grille and the hood toward the left.

4. Lift up the hood.

To close the hood:

1. Lower the hood to a height of approximately 5.9 in (15 cm) above its closed position and then let it drop.

2. After closing the hood, be sure the hood is securely locked.

If this does not close the hood, release it from a slightly higher position. Do not push the hood forcibly to close it. It could deform the metal.

Always check that the hood is

Always check that the hood is properly locked before you start driving. If it is not, it might fly open while the vehicle is moving and block your view, which may cause an accident and serious bodily injury.

    See also:

    Warning and indicator lights
    ...

    Parking brake lining
    The break-in maintenance for the parking brake linings should be performed at a SUBARU dealer. ...

    To decrease the speed (by the “RES/SET” switch)
    Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as ...