Parking on a grade

Always block the wheels under both vehicle and trailer when parking. Apply the parking brake firmly. You should not park on a hill or slope. But if parking on a hill or slope cannot be avoided, you should take the following steps.

1. Apply the brakes and hold the pedal down.

2. Have someone place wheel blocks under both the vehicle and trailer wheels.

3. When the wheel blocks are in place, release the regular brakes slowly until the blocks absorb the load.

4. Apply the regular brakes and then apply the parking brake; slowly release the regular brakes.

5. Shift into 1st or reverse gear (manual transmission models) or the “P” position (automatic transmission models) and shut off the engine.

    See also:

    Removing and reinstalling clips
    Removing clips There are several types of clips used for your vehicle Type A clips 1. Turn the clips counterclockwise using a flat-head screwdriver until the center portion of the clip is raise ...

    Warranties for U.S.A.
    All SUBARU vehicles distributed by Subaru of America, Inc. and sold at retail by an authorized SUBARU dealer in the United States come with the following warranties: • SUBARU Limited Warranty • Emis ...

    Tribeca in the Market
    As the saying goes, you only have one chance to make a first impression. That applies in the car world, and Subaru now has an uphill battle to get consumers who may have been turned off by the B9 ...