See also:

Heating and defrosting
To direct warm air toward the floor and the windshield: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Set the temperature control dial to the most comfortabl ...

Reprogramming a single HomeLink® button
1. Press and hold the HomeLink® button you wish to reprogram. DO NOT release the button until step 4 has been completed. 2. When the HomeLink® indicator light begins to flash slowly (after appr ...

Checking the clutch pedal free play
1) 0.16 – 0.43 in (4.0 – 11.0 mm) Lightly depress the clutch pedal down with your finger until you feel resistance, and check the free play. If the free play is not within proper specification, co ...