Parking brake
To set the parking brake, depress the brake pedal firmly and hold it down until the parking brake lever is fully pulled up.
To release the parking brake, pull the lever up slightly, press the release button, then lower the lever while keeping the button pressed.
When the parking brake is set while the engine is running, the parking brake warning light illuminates. After starting the vehicle, be sure that the warning light has turned off before the vehicle is driven.
Refer to “Brake system warning light”.
Never drive while the parking brake is set because this will cause unnecessary wear on the brake linings.
Before starting to drive, always make sure that the parking brake has been fully released.
See also:
Station preset
Preset buttons ...
Driving when tired or sleepy
When you are tired or sleepy, your
reaction time will be delayed and
your perception, judgment and attentiveness
will be impaired. If you
drive when tired or sleepy, your,
your passenger ...
Going & Stopping
Subaru increased the Tribeca's standard horizontally opposed six-cylinder
from 3.0 to 3.6 liters for 2008. The new engine makes 256 horsepower, which is a
modest increase over the previous engine' ...