Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the brake pedal depressed.
If the select lever does not move after performing the above procedure, perform the following steps.
. When the select lever cannot be
shifted from “P” to “N”:
Refer to “Shift lock release using the shift
lock release button”.
. When the select lever cannot be
shifted from “N” to “R” or “P”:
Within 60 seconds after placing the ignition
switch in the “Acc” position, move the
select lever to the “R” or “P” position with
the brake pedal depressed.
If you must perform the above procedure, the shift lock system (or the vehicle control system) may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.
If the select lever does not move after performing the above procedure, refer to “Shift lock release using the shift lock release button”.
See also:
Vehicle capacity weight
The load capacity of your vehicle is determined by weight, not by available cargo
space. The maximum load you can carry in your vehicle is shown on the vehicle placard
attached to the driver’s ...
HD RadioTM Technology (Digital AM and FM Radio) (type D audio)
HD Radio Technology is fueling the digital
radio revolution in the United States and
around the world.
The digital technology enables broadcasters
to offer new and unique FM content
via HD2 ...
Changing the oil and oil filter
Change the oil and oil filter according to the maintenance schedule in the “Warranty
and Maintenance Booklet”.
The engine oil and oil filter must be changed more frequently than listed in
the mai ...