List phones function
The cell phone voice tags saved in the cell phone list are spoken by using the list phones function.
1. Select the “LIST PHONES” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode.
2. Registered cell phones are displayed on the saved side. While displayed, if the “TUNE/TRACK/CH” dial is turned, the next registered cell phone is displayed.
Press the ON hook button to close the Hands-free menu.
3. Select a cell phone by operating the “TUNE/TRACK/CH” dial or pressing the talk switch . Then “SELECTED” is displayed.
4. Select the following menus.
- “SELECT PHONE” to connect the
selected cell phone
- “CHANGE NAME” to change the voice
tag
- “DELETE” to delete the selected cell
phone from the list
- “GO BACK” to go back to the “PHONE
SETUP” mode
See also:
Vehicle placard
The vehicle placard is affixed to the driver’s side B-pillar.
Example:
The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehic ...
Conditions in which front passenger’s SRS frontal airbag is not activated
The front passenger’s SRS frontal airbag will not be activated when any of the following conditions are met regarding the front passenger’s seat:
• The seat is empty.
• The seat is equipped with a r ...
Seat height adjustment (driver’s seat)
1) When the lever is pushed down, the seat is lowered.
2) When the lever is pulled up, the seat rises.
The height of the seat can be adjusted by moving the seat cushion adjustment
lever up or do ...