Registering by phone
1. Select the “BY PHONE” menu.
2. Select the “CONFIRM” menu. Then “TRANSFER” is displayed.
3. Transfer the data from the cell phone.
For details about transferring the data, refer to the Owner’s Manual of the cell phone.
4. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch 
.
5. Say the name (voice tag) to be registered.
6. Select the “CONFIRM” menu. Then “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial”.
See also:
Checking the fluid level
WARNING
Never let clutch fluid contact your eyes because clutch fluid can be harmful
to your eyes. If clutch fluid gets in your eyes, immediately flush them thoroughly
with clean water. For safet ...
Power switch and volume control
The dial is used for both power (ON/OFF) and volume control. The radio is turned
ON and OFF by pressing the dial, and the volume is controlled by turning the dial. ...
SRS airbag system warning light
When the ignition switch is turned to the “ON” position, the SRS airbag system
warning light will illuminate for approximately 6 seconds and turn off. This shows
the SRS frontal airbag and SRS sid ...