Replacing an air filter

1. Remove the glove box.

(1) Open the glove box.

(2) Remove the damper shaft from the

(2) Remove the damper shaft from the glove box.

(3) Pull out the glove box.

(3) Pull out the glove box.

2. Remove the air filter.

2. Remove the air filter.

3. Replace the air filter element with a

3. Replace the air filter element with a new one.

The arrow mark on the filter must

The arrow mark on the filter must point UP.

4. Reinstall the glove box, and connect

4. Reinstall the glove box, and connect the damper shaft.

5. Close the glove box.

6. LABEL installation
(1) Fill out the information on the service label (small).

1) Service label

1) Service label

(2) Attach the service label to the driver’s side door pillar.

1) Caution label

1) Caution label

(3) Attach the caution label next to the air filter as shown in the illustration.

    See also:

    To arm the system using power door locking switches
    1. Close all windows. 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood is locked. 5. Close the doors and the rear g ...

    Rear gate
    The rear gate can be locked and unlocked using any of the following systems. - Power door locking switch: Refer to “Power door locking switches”. - Remote keyless entry system: Refer to “Rem ...

    Examples of the types of accidents in which it is possible that the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will deploy.
    Only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags may be activated when the vehicle sustains a hard impact in the undercarriage area from the ro ...