Airflow control dial
Airflow control dial
Each dial position activates the following air outlets.
AUTO: The airflow control is adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. SUBARU recommends using the AUTO position.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and foot outlets
(Heat): Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.)
(Heat-def): Windshield defroster outlets, foot outlets and both side outlets of the instrument panel
: Windshield defroster outlets and both side outlets of the instrument panel
For details, refer to “Airflow selection”.
NOTE
When the dial is placed in the “”
or
“” position, the air inlet
selection is
automatically set to “outside air”
mode.
See also:
Traction AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B and C. Those grades
represent the tire’s ability to stop on wet pavement as measured under controlled
conditions on specified government t ...
Checking the clutch function
Check the clutch engagement and disengagement.
1. With the engine idling, check that there are no abnormal noises when the clutch
pedal is depressed, and that shifting into 1st or reverse feels smo ...
Tire size
Your vehicle comes equipped with
P-Metric tire size. It is important to
understand the sizing system in
selecting the proper tire for your
vehicles. Here is a brief review of
the tire sizing ...